Reprocessing Parts Mechanically - Weinmann RESCUE-PACK Plus Instructions For Use Manual

Emergency backpack
Table of Contents

Advertisement

7.5 Reprocessing parts mechanically

Damage to the emergency backpack and the accessories bags
due to incorrect or too frequent mechanical reprocessing!
Spinning the emergency backpack in the washing machine may
damage the waterproof coating on the emergency backpack. If
the emergency backpack or the accessories bags are processed
mechanically regularly, this may reduce the service life of the
fabric.
 Wash parts in the washing machine without a spin cycle.
 Mechanically reprocess parts only if heavily soiled or
Mechanical reprocessing may cause certain materials to discolor.
Discoloration does not impair product functionality.
Requirement
1. Refer to the cleaning and disinfection plan for details of agents,
2. Soak the parts in mains water for at least 10 minutes.
3. Brush contaminated areas under running mains water for at
4. Rinse off cleaned areas under running mains water for
5. If necessary: Open bags.
6. Wash the parts in a washing machine with cleaning agent and
7. Allow parts to dry fully in a warm place.
8. Rub zippers with a colorless dry lubricant (silicone spray).
contaminated.
The parts are presumed to be contaminated or heavily soiled.
Hygienic reprocessing is prepared
dose, and exposure time for the parts
least 2 minutes using a cleaning brush until such areas look
clean.
2 minutes.
disinfectant but without a spin cycle.
7 Hygienic reprocessing
(see 7.2, p.
30).
(see 7.7, p.
RESCUE-PACK Plus
35).
EN
33

Advertisement

Table of Contents
loading

Table of Contents