Logger Script Fw 2.33 (Counter Inputs); 10.3.2.3.1 Data Format Of An Lcdx Variable; Table 59: Data Format, Logger Script Extension, Variable Lcdx; Table 60: Counter Status - WAGO -TO-PASS 761 Manual

128 WAGO TO-PASS® Web
10.3.2.3

Logger Script FW 2.33 (Counter Inputs)

The counter inputs have resulted in counter data and an indicator being added to
the display for non-set time (operating hours) to the logger script ("LV=02.01").
Example:
&HT=1
&LCD2=0;0;e;20F5800;d;0;0;0

10.3.2.3.1 Data Format of an LCDx Variable

Table 59: Data format, logger script extension, Variable LCDx

Index Contents
0
1
2
3
4
5
6
7
The counter status can assume the statuses indicated by the transmitted SMS:

Table 60: Counter status

Status Explanation
0
e
d
o
r
s
c
The counter status shows the last change that has occurred since the last logger
script transmission, or after a system start (independent of the SMS and value
status).
&HT=1: (value always 1) the device time has not been set (&TI entry is operating
hours information, started on 01.01.00 at 00:00:00), otherwise this entry is not
present.
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
(same as for Value Script)
Counter status 1st input
Counter value 1st input, hexadecimal Value > 8
Counter status 2nd input
Counter value 2nd input, hexadecimal Value > 8
Counter status 3rd input
Counter value 3rd input, hexadecimal Value > 8
Counter status 4th input
Counter value 4th input, hexadecimal Value > 8
Digital input not configured as a counter.
Counter is active.
Counter is not active.
Counter overflow.
Counter has been reset.
Counter has been started.
Counter value has been changed.
WAGO-TO-PASS® 761
Format
Status 1
Status 1
Status 1
Status 1
Manual
Version 1.0.0