Multiplex Alarm Text; Figure 29: Configuring Multiplex Operation Alarm Texts; Table 31: Configuring Multiplex Operation Alarm Texts - WAGO -TO-PASS 761 Manual

68 Parameterizing
7.5.2.2

Multiplex Alarm Text

Select your TO-PASS
using the identifier. Select the Multiplex Table option under the Multiplex Input
entry. The input fields for the alarm texts pertaining to the 16 statuses are
provided on the right side.

Figure 29: Configuring multiplex operation alarm texts

Table 31: Configuring multiplex operation alarm texts

Alarm texts
Value 0 ... Value
15
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
®
telecontrol module from the left side of the project tree
In these fields enter the texts to be transmitted in the message
when the corresponding status combination of digital inputs
DI1 ... DI4 are fulfilled.
Messages are not sent for status combinations without any
entries.
WAGO-TO-PASS® 761
Manual
Version 1.0.0