24
Device Description
3.4.6
Counter Inputs
Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.
Digital inputs D1 ... D4 can be configured as counter inputs.
Table 7: Counter input pin assignments
Figure 6: Counter input pin assignments
Connection
5
6
7
8
38
Connect shielding!
Shielded cables are recommended for the counter inputs.
When using shielded cables, the shield must be routed to the grounded DIN rail
(see Section "Connections" > "Shielding").
Short name
DI1
DI2
DI3
DI4
Shield
761-111 Telecontrol Module Compact, 2 AI
Explanation
Counter input 1 (configurable)
Counter input 2 (configurable)
Counter input 3 (configurable)
Counter input 4 (configurable)
Shield termination
WAGO-TO-PASS® 761
Manual
Version 2.0.0