Testing The Modem - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
9.4

Testing the Modem

Direct serial link required
The modem test may only be performed with a direct serial link to the TO-PASS
telecontrol module.
To test the mode, select the menu item Modem > Test.
The following window is displayed:
Figure 48: Testing the modem
A link to the modem is established and the signal strength displayed.
Click [OK] to end the test and close the window.
Manual
Version 1.0.0
Diagnostics 109
®