Analog Outputs; Current Measurement; Figure 20: Connection Example For A Display Device At Ao1 Output - WAGO -TO-PASS 761 Manual

46 Connect Devices
5.2.5

Analog Outputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.
Connect shielding!
Shielded cables are required for analog outputs. The cable shield must be
connected to the grounded DIN rail (see section "Connections" > "Shielding").
5.2.5.1

Current Measurement

Figure 20: Connection example for a display device at AO1 output

761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
WAGO-TO-PASS® 761
Manual
Version 1.0.0