Testing The Counter Inputs; Figure 46: Testing Counters - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
9.2

Testing the Counter Inputs

To test the counter inputs, select the menu item Edit > Test counters.

Figure 46: Testing counters

The counter statuses are shown at the top of the window, while the counter values,
the starting and end values and the limits are shown at the bottom.
To start a counter, click the button [Activate].
To stop a counter, click the button [Deactivate].
To restore the counter to its starting value, click the button [Reset].
To set a counter to a new value, enter the required counter value in the
corresponding input field and then click the associated button [Set] to apply the
new value.
Click [OK] to end the test and close the window.
Alternatively, the counter inputs can also be tested using the menu item
Visualization > Process values.
Manual
Version 1.0.0
Diagnostics 107