108
Diagnostics
9.3
Testing the Connection
Direct serial link required
The connection may only be tested with a direct serial link to the TO-PASS
telecontrol module.
To test the connection, select the menu option Edit > Test SMS/GPRS. The
following window is displayed:
Figure 47: Testing the connection
Select the address to send an SMS to and enter the text to be sent. Click the
[Send] button to send the message. The status of the transmission is then
displayed.
Click [OK] to end the test and close the window.
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
WAGO-TO-PASS® 761
®
Manual
Version 1.0.0