Reading Parameters From The Module - WAGO -TO-PASS 761 Manual

56 Parameterizing
7.2

Reading Parameters from the Module

After you have set the type of connection for communicating with the TO-PASS
telecontrol module, you are then able to read out the parameters of the connected
module.
Select the menu option Edit > Read Parameters. The software then reads out all
the parameters of the TO-PASS
Then you can adapt the parameter according to your requirements.
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
®
telecontrol module.
WAGO-TO-PASS® 761
®
Manual
Version 1.0.0