Counter Inputs; Figure 6: Counter Input Pin Assignments; Table 7: Counter Input Pin Assignments - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
3.4.6

Counter Inputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.
Digital inputs D1 ... D4 can be configured as counter inputs.

Table 7: Counter input pin assignments

Figure 6: Counter input pin assignments

Connection
5
6
7
8
38
Connect shielding!
Shielded cables are recommended for the counter inputs.
When using shielded cables, the shield must be routed to the grounded DIN rail
(see Section "Connections" > "Shielding").
Manual
Version 1.0.0
Short name
DI1
DI2
DI3
DI4
Shield
Explanation
Counter input 1 (configurable)
Counter input 2 (configurable)
Counter input 3 (configurable)
Counter input 4 (configurable)
Shield termination
Device Description 25