Remote Polling Via Sms; Table 42: Sms Format; Table 43: Items Added To Sms For Counter Inputs - WAGO -TO-PASS 761 Manual

88 Operation
8.1.1

Remote Polling via SMS

For remote polling via SMS, send an SMS containing the text "State" to the TO-
®
PASS telecontrol module.
The TO-PASS
mobile phone containing all of the current process values.

Table 42: SMS format

Value transmitted:
Module 1
10010011
+00.00mA
+00.00mA
+00.00mA
+00.00mA
+00.00mA
+00.00mA
+00.00mA
+00.00mA
0110
+00.00mA
+00.00mA
Normal Status
AC=99
If at least one digital input is configured as a counter input, the counter status is
added to the SMS. The additional lines are added in front of the "Status text" line.
The counter status shows the last change that has occurred since the last SMS
transmission, or after a system start (independent of the value and logger status).
Example:

Table 43: Items added to SMS for counter inputs

Value transmitted
0
e34560000
C10000000
R0
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
®
telecontrol module responds promptly with an SMS to your
Meaning
Identity
Condition of the digital inputs 1 ... 8
(0 = not set, 1 = set)
Analog input 1
Analog input 2
Analog input 3
Analog input 4
Analog input 5
Analog input 6
Analog input 7
Analog input 8
Condition of the digital outputs 1 ... 4
(0 = not set, 1 = set)
Analog output 1
Analog output 2
Status text or prepaid information (optional)
Alarm counter
(displays the alarms that are still possible per hour).
The alarm counter only transmitted when enabled (Alarm
counter parameter in the Identifier dialog <> "0").
Explanation
Status counter 1 (no counter)
Status counter 2 (counter active, counter value =
34560000)
Status counter 3 (counter value changed, value =
10000000)
Status counter 4 (counter reset, value = 0)
WAGO-TO-PASS® 761
Manual
Version 1.0.0