To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the
page 353.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code from the
Programming Chart,
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the Save bar code from the
page 353.
166
beginning on page 353.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Programming Chart,
2nd Scan Transmission
Programming Chart,
Xenon/Granit User Guide
beginning on
beginning on