Honeywell Xenon Series User Manual page 311

Area-imaging scanners

Table of Contents

Primary/Alternate Data Formats

Single Scan Data Format Change

All Symbologies

Codabar Start/Stop Char.

Codabar Check Char.

Codabar Concatenation

Codabar Message Length

Code 39 Start/Stop Char.

Code 39 Check Char.

Code 39 Message Length

Xenon/Granit User Guide

* Indicates default

Primary Data Format

Data Format 1

Data Format 2

Data Format 3

Single Scan-Primary

Single Scan-Data Format 1

Single Scan-Data Format 2

Single Scan-Data Format 3

All Symbologies Off

Default All Codabar

*Don't Transmit

*No Check Char.

Validate, But Don't Transmit

Validate, and Transmit

Minimum (2 - 60) *4

Maximum (2 - 60) *60

Default All Code 39

*Don't Transmit

*No Check Char.

Validate, But Don't

and Transmit

Minimum (0 - 48) *0

Maximum (0 - 48) *48

Serial Command

# Indicates a numeric