Table of Contents
Advertisement
Linking Sound
Under normal operations, the scanner clicks when linking to a base. If you want to
silence this sound, scan the Silent Linking bar code below. To return to the default
clicking sound, scan Linking Sound. Default = Linking Sound.
Error Indicators
Beeper Pitch - Base Error
The base can be configured to beep at a particular pitch when an error occurs,
such as transmission problems to a host system. The beeper pitch codes modify
the pitch (frequency) of the error tone the base emits when there is an error. Default
= Low.
Xenon/Granit User Guide
High (4200 Hz)
* Linking Sound
* Razz (250 Hz)
High (4200 Hz)
Medium (3250 Hz)
Silent Linking
Medium (3250 Hz)
93
Advertisement
Table of Contents
