Laptop Direct Connect; Rs232 Serial Port; Rs485 - Honeywell Xenon Series User Manual

Laptop Direct Connect

For most laptops, scanning the Laptop Direct Connect bar code allows operation
of the scanner in parallel with the integral keyboard. The following Laptop Direct
Connect bar code also programs a carriage return (CR) suffix and turns on Emu-
late External Keyboard
Note: The Granit 1980i does not support Laptop Direct Connect.

RS232 Serial Port

The RS232 Interface bar code is used when connecting to the serial port of a PC or
terminal. The following RS232 Interface bar code also programs a carriage return
(CR) and a line feed (LF) suffix, baud rate, and data format as indicated below. It
also changes the trigger mode to manual.

RS485

Scan one of the following "Plug and Play" codes to program the scanner for an IBM
POS terminal interface.
Note: This interface is not supported in Granit devices.
After scanning one of these codes, you must power cycle the cash register.
18
Option
Baud Rate
Data Format
IBM Port 5B Interface
(page 34).
Laptop Direct Connect
with CR suffix
Setting
115,200 bps
8 data bits, no parity bit, 1 stop bit
RS232 Interface
IBM Port 9B
HHBCR-1 Interface
Xenon/Granit User Guide