Intermessage Delay - Honeywell Voyager 147 Series User Manual

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode using the
Programming
To remove this delay, scan the Intermessage Delay barcode, then set the number
of delays to 0. Scan the Save barcode using the
98
Chart.
1st Scan Transmission 2nd Scan Transmission
Intermessage Delay
Intermessage Delay
Programming Chart.
Voyager XP User Guide