Straight 2 Of 5 Industrial (Three-Bar Start/Stop) - Honeywell Xenon Series User Manual

Area-imaging scanners

Table of Contents

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data

received does not display with the proper characters, it may be because the bar

code being scanned was created using a code page that is different from the one

the host program is expecting. If this is the case, scan the bar code below, select

the code page with which the bar codes were created (see

Character Replacements

then appear properly.

Straight 2 of 5 Industrial (three-bar start/stop)

Straight 2 of 5 Industrial On/Off

on page 346), and scan the value and the Save bar code

Programming Chart,

beginning on page 353. The data characters should

Code 93 Code Page

ISO 2022/ISO 646

Xenon/Granit User Guide