Intermessage Delay - Honeywell Voyager XP 1470g Series User Manual

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code using the
Programming
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the Save bar code using the
98
Chart.
1st Scan Transmission 2nd Scan Transmission
Intermessage Delay
Intermessage Delay
Programming
Voyager 1470/1472 User Guide
Chart.