Honeywell Xenon Series User Manual page 195

B3 is the "Insert symbology name" command
F4 is the "Insert a character multiple times" command
20 is the hex value for a space
01 is the number of times the space character is sent
B4 is the "Insert bar code length" command
F4 is the "Insert a character multiple times" command
20 is the hex value for a space
01 is the number of times the space character is sent
F1 is the "Send all characters" command
0D is the hex value for a CR
The data is output as:
Code128 20 1234567890ABCDEFGHIJ
<CR>
Insert key strokes
B5 Insert a key stroke or combination of key strokes. Key strokes are dependent on your
keyboard (see
including arrows and functions. Syntax = 5CB5xxssnn where xx is the number of
keys pressed (without key modifiers), ss is the key modifier from the table below, and
nn is the key number from the
For example, B501021F inserts an "A" on a 104 key, U.S. style keyboard. B5 = the
command, 01 = number of key press events (without the key modifier), 02 is the key
modifier for Shift Right, and 1F is the "a" key. If a lower case "a" were to be inserted,
B501001F would be entered.
Xenon/Granit User Guide
Keyboard Key References
Keyboard Key
Key Modifiers
No Key Modifier
Shift Left
Shift Right
Alt Left
Alt Right
Control Left
Control Right
on page 349). Any key can be inserted,
References, page 349.
Hex
00
01
02
04
08
10
20
175