Base Charge Status; Base Power Communication Indicator; Reset Scanner; Base Charge Modes - Honeywell Xenon Series User Manual

Base Charge Status

When charging, the base indicates the progress while the scanner resides in the
base.
Base Button/LED
Green on
Green slow blink
Green fast blink
Yellow fast blink
* The number of scans was measured with a clearly printed UPC code in good light.
The approximate number of scans varies with changes in label quality, symbology,
and environmental factors.

Base Power Communication Indicator

To display the power indicator on a base, scan the Base Power Communication
Indicator On bar code. To turn off the power indicator, scan the Off bar code.
Default = On.
* Base Power Communication

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the base.

Base Charge Modes

When the base has both an external power supply (plugged into the auxiliary power
port) and a host interface cable, it will draw its power from the external power sup-
ply. When the base does not have an external power supply, it draws its power from
Xenon/Granit User Guide
Charge Level
100%
50-99%
30-50%
0-30%
Indicator On
Approximate Expected
Scans*
450
200
100
Charging - do not scan
Reset Scanner
Base Power Communication
Indicator Off
89