Table of Contents
Advertisement
labeling, manifesting, and shipping of spent batteries. Contact the Product Service
Department
that your cost of returning the batteries significant, it may be more cost effective to
locate a local recycle/disposal company.
Beeper and LED Sequences and Meaning
The scanner contains LEDs on the rear of the unit that indicate linking status,
decoding state, and battery condition. The base has LEDs on the top of the unit
that indicate its power up, communication, and battery charge condition. The red
LED = error; green LED = success of any type. Scanners and the CCB01-010BT
base have audible indicators as well: 1 razz or error tone = error; 2 beeps = menu
change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indication, beeps, and
vibrations for the scanner.
Scanner LED Sequences and Meaning
LED Indication
Normal
Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking
Base/Access Point LED Sequences and Meaning
The base contains a red LED and the Access Point has a blue LED that indicate the
status of the unit and verifies its communication with the host system. The base
also has a green LED that indicates scanner battery charge condition.
Red or Blue LED - Host Communication
Red or Blue LED
Off
On continuously
Short blinks in multiple pulses. Occurs while transferring data to/
from the RF module or the Host port.
Xenon/Granit User Guide
(page
xvii) for recycling or disposal information. Since you may find
Beeper
Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Vibrate
Cause
Indication
None
Battery low
None
Successful communication or
linking
None
Failed communication
2 vibrations
Successful menu change
1 long vibration
Unsuccessful menu change
Communication Condition
USB suspend
Power on, system idle
Receiving data
51
Advertisement
Table of Contents
