Error Indicators; Beeper Pitch - Base Error; Number Of Beeps - Base Error - Honeywell Xenon Series User Manual

Error Indicators

Beeper Pitch - Base Error

Note: This feature only applies to the CCB01-010BT base.
The CCB01-010BT base can be configured to beep at a particular pitch when an
error occurs, such as transmission problems to a host system. The beeper pitch
codes modify the pitch (frequency) of the error tone the base emits when there is
an error. Default = Low.

Number of Beeps - Base Error

Note: This feature only applies to the CCB01-010BT base.
The number of beeps and LED flashes emitted by the CCB01-010BT base for an
error condition can be programmed from 1 - 9. For example, if you program this
option to have five error beeps, there will be five error beeps and five LED flashes in
response to an error. To change the number of error beeps, scan the bar code below
and then scan a digit (1-9) from the
then Save. Default = 1.
Xenon/Granit User Guide
High (4200 Hz)
* Razz (250 Hz)
High (4200 Hz)
Number of Base Error Beeps/LED Flashes
Programming Chart,
Medium (3250 Hz)
beginning on page 353,
55