Interleaved 2 Of 5 - Honeywell Xenon Series User Manual

Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Character Replacements
from the
then appear properly.

Interleaved 2 of 5

Interleaved 2 of 5 On/Off
Check Digit
No Check Digit indicates that the scanner reads and transmits bar code data with
or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads Inter-
leaved 2 of 5 bar codes printed with a check digit, but will not transmit the check
digit with the scanned data.
194
on page 346), and scan the value and the Save bar code
Programming Chart,
< Default All Interleaved 2 of 5 Settings >
* On
beginning on page 353. The data characters should
Code 39 Code Page
* Full ASCII Off
ISO 2022/ISO 646
Off
Xenon/Granit User Guide