Low Power Alert Range; Low Power Alert Flash Number; Low Power Alert Repeat - Honeywell Xenon Series User Manual

Low Power Alert Range

Set the power range that will trigger a low power alert. Default = 10-30%.

Low Power Alert Flash Number

You can program the scanner's LEDs to flash up to 9 times for the low power alert.
If the
flash. To set the number of low power flashes, scan the bar code below and then
scan a digit (1-9) bar code from the
then Save. Default = 3 flashes.
Interval Between Flashes
Set the length of time, in seconds, between the LED flashes for a low power alert. To
set the interval, scan the bar code below and then scan a digit (1-9) bar code from
the
between flashes.

Low Power Alert Repeat

Set how many times you want the low power flash pattern (flashes and intervals) to
repeat. To set the number, scan the bar code below and then scan a digit (1-5) bar
code from the
Xenon/Granit User Guide
*Low Power Alert 10-30%
Low Power Alert Beep
Programming Chart,
Programming Chart,
(page 88) is on, a double beep will sound with each
Programming Chart,
Low Power Alert Flash Number
beginning on page 353, then Save. Default = 2 seconds
Interval Between Flashes
beginning on page 353, then Save. Default = 1.
Low Power Alert Repeat
Low Power Alert 10-50%
beginning on page 353,
87