Table of Contents
Advertisement
Straight 2 of 5 Industrial Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
Straight 2 of 5 IATA (two-bar start/stop)
Straight 2 of 5 IATA On/Off
Straight 2 of 5 IATA Redundancy
If you are encountering errors when reading Straight 2 of 5 IATA bar codes, you may
want to adjust the redundancy count. Redundancy adjusts the number of times a
bar code is decoded before transmission, which may reduce the number of errors.
Note that the higher the redundancy count, the longer it will take to decode the bar
Xenon/Granit User Guide
(page 188) for additional information. Minimum and Maximum
<Default All Straight 2 of 5 IATA Settings>
On
Message Length
Maximum Message Length
* Off
199
Advertisement
Table of Contents
