Scanner; Low Power Alerts - Honeywell Xenon Series User Manual

Scanner

Scanner Communication and Scanning
The following feedback is provided by the scanner and indicates communication
and scanning status.
LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking
Scanner Charge Pack Status
The following charge status feedback is provided by the scanner when the scanner
is out of the base and has been idle for 5 seconds.
Scanner LED
Yellow
3 sets of flashes
Red
3 sets of flashes
* The number of scans was measured with a clearly printed UPC code in good light.
The approximate number of scans varies with changes in label quality, symbology,
and environmental factors.

Low Power Alerts

Low power alerts allow you to customize the scanner LEDs to flash in different pat-
terns when the scanner charge level is low. Use the bar codes that follow to cus-
tomize the settings for the power range being configured, the number of flashes
per alert, the interval between flashes, the number of alerts, and the interval
between alerts. The beeper can also be set to silent, or to sound with the flash pat-
terns.
86
Beeper Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Scanner Beep
2 short beeps per flash
2 short beeps per flash
Cause
Charge pack low
Successful communication or linking
Failed communication
Successful menu change
Unsuccessful menu change
Charge Approximate
Level Expected Scans*
30% 100
10% 50
Xenon/Granit User Guide