Honeywell Xenon Series User Manual page 237

EAN/JAN-8 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-8 bar codes that
have addenda. Default = Not Required.
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
(in milliseconds) for this timeout by scanning the bar code below, then setting the
timeout (from 0-120 milliseconds) by scanning digits from the
Chart,
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
EAN/JAN-8 Addenda Separator
When this feature is On, there is a space between the data from the bar code and
the data from the addenda. When turned Off, there is no space. Default = On.
Xenon/Granit User Guide
5 Digit Addenda On
Required
beginning on page 353 of this manual, then Save. Default = 500.
* On
UPC-E0 Addenda
Addenda Timeout
* 5 Digit Addenda Off
* Not Required
Required. Set the length
Programming
217