Page Pitch; Linking Sound; Error Indicators; Beeper Pitch - Base Error - Honeywell Xenon 1900 User Manual

Page Pitch

When the scanner is out of the base and you press the Page button, the scanner
associated with that base begins beeping. You can set the pitch of the paging beep
for the scanner by scanning one of the following bar codes. Default = Low.

Linking Sound

Under normal operations, the scanner clicks when linking to a base. If you want to
silence this sound, scan the Silent Linking bar code below. To return to the default
clicking sound, scan Linking Sound. Default = Linking Sound.

Error Indicators

Beeper Pitch - Base Error

The base can be configured to beep at a particular pitch when an error occurs,
such as transmission problems to a host system. The beeper pitch codes modify
the pitch (frequency) of the error tone the base emits when there is an error. Default
= Low.
Xenon/Granit User Guide
* Low (1000 Hz)
High (4200 Hz)
* Linking Sound
Medium (3250 Hz)
Silent Linking
91