Cpu Status Submenu - Fujitsu Primergy RX100 S2 User Manual

Chapter 8 Hardware Configuration/Utilities
Item
System Event Log
(List mode)
Realtime Sensor Data
LAN Settings
■ LAN Settings Submenu
These menu items are fixed on this server. If you need to configure the LAN setup including IP
addresses, refer to "9.3.4 Before Using the Remote Control Service" ( pg.242) and use the Server
Management Tools.

8.2.13 CPU Status Submenu

Appears when [CPU Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed CPU.
CPU Status
F1 Info
Esc Exit
Item
CPU Status
212
table: Items on the IPMI Submenu
Setting
[Enter]
[Enter]
[Enter]
PhoenixBIOS Setup Utility
Server
CPU Status
[Enabled]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the CPU Status Submenu
Setting
• Enabled (at the time of
purchase)
• Disabled
• Failed
Description
Lists the contents of the system event log.
For details on contents, refer to "9.3 System Event Log"
( pg.239).
Displays temperature and voltage sensor data.
Performs LAN settings to enable remote operations using
Remote Control Service.
■
" LAN Settings Submenu" (pg.212)
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Sub-Menu
Description
Sets whether or not to allow the use of CPUs
installed in the CPU sockets. This must not be set to
[Disabled] or [Failed].