Cpu Status Submenu; Memory Status Submenu - Fujitsu Primergy TX120 User Manual

Item
ASR&R Boot Delay
Power Cycle Delay
Boot Retry Counter
Diagnostic System
Next Boot uses
Device Instance
Temperature Monitoring
CPU Status
Memory Status
Console Redirection

CPU Status Submenu

This submenu sets whether or not to allow the use of the installed CPU.
Item
CPU 0 Status

Memory Status Submenu

This submenu sets whether or not to allow the use of the installed memory.
Item
DIMM-1A
DIMM-2A
DIMM-1B
DIMM-2B
table: Items on the Server Menu
Setting
• 2 (Initial value)
• 1–30
• 7 (Initial value)
• 0-15
• 3 (Initial value)
• 0–7
Disabled (Unchangeable)
Boot option (Unchangeable)
0 (Unchangeable)
Disabled (Unchangeable)
Press the [Enter] key to display the "
Press the [Enter] key to display the "
window.
Press the [Enter] key to display the "
window.
table: Items on the CPU Status Menu
Setting
Enabled (Unchangeable)
table: Items on the Memory Status Menu
Setting
Enabled (Unchangeable)
PRIMERGY TX120 User's Guide
Description
Sets the standby time for startup after shutdown due
to trouble (such as overheating) in minutes.
The system restarts after the set standby time. The
power LED lights in green in standby mode.
Sets the time until the server is turned on after it is
turned off.
Sets the maximum number of retries to boot the
operating system within the range of 0 to 7.
Sets whether or not to diagnose the BootDevice
when restarting with ASR&R.
Sets the boot device for restarting.
Sets the device ID of LAN Boot Device diagnosis.
Sets whether or not the server can be turned on when
the temperature is not in its operating environment
range (10-35 °C).
CPU Status Submenu" ( pg.207) window.
Memory Status Submenu" ( pg.207)
Console Redirection Submenu" ( pg.208)
Description
Sets whether or not to allow the use of CPUs installed
in CPU Socket 0.
Description
Sets whether or not to allow the use of memory in
Memory Slots 1A to 2B.
8
207