Display L2Vpn Vsi - H3C MSR 5600 Comware 7 Vxlan Command Reference

Related commands
reset l2vpn mac-address

display l2vpn vsi

Use display l2vpn vsi to display information about VSIs.
Syntax
display l2vpn vsi [ name vsi-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name vsi-name : Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you
do not specify a VSI, this command displays information about all VSIs.
verbose : Displays detailed information about VSIs. If you do not specify this keyword, the
command displays brief information about VSIs.
Examples
# Display brief information about all VSIs.
<Sysname> display l2vpn vsi
Total number of VSIs: 1, 1 up, 0 down, 0 admin down
VSI Name
vpna
Table 5 Command output
Field
MTU
State
# Display detailed information about all VSIs.
<Sysname> display l2vpn vsi verbose
VSI Name: vpna
VSI Index
VSI State
MTU
Bandwidth
Broadcast Restrain
Multicast Restrain
Unknown Unicast Restrain: 5120 kbps
VSI Index
0
Description
MTU on the VSI.
VSI state:
•
Up—The VSI is up.
•
Down—The VSI is down.
•
Admin down—The VSI has been manually shut down by using the
shutdown command.
: 0
: Up
: 1500
: Unlimited
: 5120 kbps
: 5120 kbps
6
MTU State
1500 Up