Recalling Files; Saving File/Default/Program - Chroma 63200 Series Operation & Programming Manual

Press ▼ key and the display will show:
4.2.6

Recalling Files

Press to recall files from 1 to 100. Files 1 to 100 are user data. File 101 is factor
RECALL
set state. After a file is recalled, the display will go to mode editor for you to edit or view
the file. Pressing
RECALL
no. is 1 when the Load is powered on.
Press , ,
RECALL 3 ENTER
The data of the Load will be recalled when you execute file recall.
4.2.7

Saving File/Default/Program

There are 100 file locations (1 to 100) for you to save files. Press
a file to location 20.
Press , ▲, ▼ until the display shows as follows. The DEFAULT states are used for
SAVE
Electronic Load after power-on. Press
Press , ▲, ▼ until the display shows as follows.
SAVE
<LOAD FW> WRTR: 00.85
BOOT: 00.85 MAIN: 00.85
<PANEL FW> WRTR: 00.85
BOOT: 00.85 MAIN: 00.85
the display will show the file no. last recalled. The default file
to recall the number 3.
RECALL
FILE NO : 3
SAVE
FILE NO :
,
1 ENTER
SAVE DEFAULT
1: YES
FILE
SAVE
FILE
20
to save DEFAULT to EEPROM.
2: NO
Local Operation
, , , to save
2 0 ENTER
4-17