Recalling Memory; Using Offset Or Get Cs; How To Get In Offset Or Get Cs Screen - Chroma 19020 User Manual

4.6.4 Recalling Memory

Follow the steps below to recall the programs stored in memory:
1. Use , to move the highlight to memory to be recalled and press Function Key
▲ ▼
[RECALL].
STORE/RECALL
01 . (01) CHROMA
02 . (00)
03 . (00)
04 . (00)
05 . (00)
06 . (00)
07 . (00)
08 . (00)
09 . (00)
10 . (00)
2. A recall confirmation dialog box is prompted. Press Function Key [YES] to confirm it or
press Function Key [NO] to cancel it.

4.7 Using OFFSET or GET Cs

4.7.1 How to Get in OFFSET or GET Cs Screen

1. Select OFFSET or GET Cs operation in TEST screen as shown below:
TEST – 1/2
MODE CH
01
02
03
04
05
OSC
06
07
08
09
10
STANDBY
2. Press Function Keys [OFFSET] or [GET Cs] to select the desired function. If these two
keys are grayed out, it means they are invalid here.
RECALL FROM MEMORY 1
REMOTE LOCK
SOURCE LIMIT
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
50V 0.0 nF
REMOTE LOCK
YES
NO
CORR ERROR
RES. RECALL
OFFSET
GET Cs
CLEAR
SLAVE
1 2 3 4 5 6 7 8 9
CORR ERROR
Operation
4-23