Chroma 63200 Series Operation & Programming Manual page 84

High Power DC Electronic Load 63200 Series Operation & Programming Manual
*ESE
Description This command sets the condition of the Standard Event Status
Syntax *ESE <NRf>
Parameters 0 to 255
Example *ESE 48
Query Syntax *ESE?
Return Parameters <NR1>
Query Example *ESE?
*ESR?
Description This query reads the Standard Event Status register. Reading
Bit Position
Bit Name
Bit Weight
CME = Command error
EXE = Execution error
QYE = Query error
Query Syntax *ESR?
Return Parameters <NR1>
Query Example *ESR?
Return Example 48
*IDN?
Description This query requests the Electronic Frame (632xx) to identify itself.
Query Syntax *IDN?
Return Parameters <aard>
Query Example *IDN?
7-2
Standard Event Status Enable Command/Query
Enable register to determine which event the Standard Event Status
Event register (see *ESR?) is allowed to set the ESB (Event
Summary Bit) for the Status Byte register. A "1" in the bit position
enables the corresponding event. All the events enabled by
Standard Event Status Event register are logically ORed to cause the
ESB (bit 5) of the Status Byte register to be set. See the
descriptions of these registers in Chapter 8 Status Reporting.
This command enables the CME and EXE events
for the Standard Event Status Event register.
This query returns the current setting for "Standard
Event Status Enable".
Standard Event Status Register Query
the register clears it. See detailed explanation of this register in
Chapter 8 Status Reporting.
Bit Configuration of Standard Event Status Event Register
7 6
0 0
128 64
Return the Standard Event Status Register readings.
Identification Query
String
Chroma
632xx
12345678
01.00
5 4 3
CME EXE DDE
32 16 8
DDE = Device-dependent error
OPC = Operation complete
Information
Manufacture
Model name
Serial number
Firmware version
2 1 0
QYE 0 OPC
4 2 1