7.
Language Dictionary
Commands for operating the 63200 Electronic Load remotely are grouped into subsystems.
Each command belonging to the same subsystem is arranged in alphabetic order. A syntax
chart of the subsystem that contains the commands in the same group is included. Sub-
systems are ordered alphabetically according to their names in the following sections.
7.1.1
Common Commands
Common commands defined by the IEEE488.2 standard are generic commands and queries.
The first part of the language dictionary covers the commands. Each of them has a leading
"*".
Common Commands Syntax
*CLS
Clear status
*ESE <NR1>
Standard event status enable
*ESE?
Return standard event status enable
*ESR?
Return event status enable
*IDN?
Return instrument identification
*OPC
Enable "operation complete" bit in ESR
*OPC?
Return a "1" when operation complete
*RCL <NRf>
Recall instrument state
*RST
Reset
*SAV <NRf>
Save instrument state
*SRE <NR1>
Set service request enable register
*SRE?
Return service request enable register
*STB?
Return status byte
7.1.2
Common Command Dictionary
*CLS
Description This command clears the following actions:
Syntax *CLS
Parameters None
Clear Status Command
1. Clear Questionable Status Event register
2. Clear Standard Event Status Event register
3. Clear Status Byte
4. Clear the Error Queue
Language Dictionary
7-1