High Power DC Electronic Load 63200 Series Operation & Programming Manual
4.2.10 Online Change Level
The Load provides you two ways for changing level online. They are convenient for you to
change load directly with the rotary knob when LOADON. These two operation modes are
described below.
By Rotary knob:
In LOADON, change load with the rotary knob in resolution unit.
When the rotary knob rotates clockwise, it means as follows.
CC mode: raise the current value.
CR mode: raise the resistance value.
CV mode: raise the voltage value.
CP mode: raise the power value.
When the rotary knob rotates counterclockwise, it means as follows.
CC mode: lower the current value.
CR mode: lower the resistance value.
CV mode: lower the voltage value.
CP mode: lower the power value.
By CURSOR EDIT: In LOAD ON, press the mode key
4-20
display show numeric values for the setting. Press
see the cursor blinking on the display. Press ▲, ▼ keys to move the
cursor to the digit you want to edit. Change the value by rotary knob.
Press the
CURSOR EDIT
,
,
CC
CR
CV
key again to disable the cursor.
, or
to make the
CP
CURSOR EDIT
to