Chroma 63200 Series Operation & Programming Manual page 56

High Power DC Electronic Load 63200 Series Operation & Programming Manual
DC ELECTRONIC LOAD
VOLTS
1
1. Line switch
2. LCD display
3. 7-segment LEDs
4. System keys
SYS
RECALL
SAVE
CONF
5. Function keys
CC
CR
CV
4-2
3
63203 60A/600A 16V/80V 5.2KW 4KW
MODEL
AMPS WATTS/OHMS
CC
CR
CV
CP
4
Figure 4-1 Front Panel of the Load
Turn the ac power on/off.
Display setting information normally.
Show the V, I, P, R measured data.
To set the remote control status, ext. wave enable and
Parallel function parameters.
To recall the saved settings from EEPROM, and all settings
from specified files (1 to 101).
To save all of the present mode settings in the specified files (1
to 100). The save program is from 1 to 10. Saving
DEFAULT is to save the status for the next time the Electronic
Load is turned on. All saved settings are stored in EEPROM,
and will not be lost when ac power is cycled.
To select configuration data for editing.
To select the constant current mode for editing and the CC led
aside this key will be on.
To select the constant resistance mode for editing and the CR
led aside this key will be on.
To select the constant voltage mode for editing and the CV led
9
7 8
CURSOR
4 5 6
EDIT
1 2 3
.
0
GO/NG
5 6
2