High Power DC Electronic Load 63200 Series Operation & Programming Manual
Return Example 2.5
CURRent:DYNamic:T1/T2
Description Set the duration parameter T1 or T2 for dynamic load.
Syntax CURRent:DYNamic:T1 <NRf+>[suffix]
Parameters For valid value range refer to respective specification.
Example CURR:DYN:T1 10mS
Query Syntax CURRent:DYNamic:T1?
Return Parameters <NR2> [Unit=Sec]
Query Example CURR:DYN:T1?
Return Example 0.15
7-12
CURRent:DYNamic:T2 <NRf+>[suffix]
CURR:DYN:T2 2S
CURR:DYN:T1 MAX
CURR:DYN:T2 MIN
CURRent:DYNamic:T2?
CURRent:DYNamic:T1? MAX
CURRent:DYNamic:T2? MIN
load.
Set dynamic duration T1 = 10mS.
Set dynamic duration T2 = 2S.
Set dynamic duration T1 to the
maximum value.
Set dynamic duration T2 to the
minimum value.
Return the dynamic duration parameter
T1.