Edit The Wavelength Program - PerkinElmer 200A Series User Manual

Edit the Wavelength Program

If you need to edit the wavelength program follow the next procedure.
Press PROG key.
↓
SET PROGE NO. (1 ~ 9)
1
Press 1 key and then ENT.
↓
EDIT MODE (MODIFY=0, NEW=1)
0
Press 1 key and then ENT.
↓
TIME Ex Em
0.0 250 350
Press 0 key and then ENT.
Press 2 5 0 keys and then ENT.
Press 3 5 0 keys and then ENT.
Press 1 key and then ENT.
Press 3 key and then ENT.
↓
TIME Ex Em
0.0 250 350
Press 1 0 keys and then ENT.
Press 2 7 0 keys and then ENT.
Press 3 7 0 keys and then ENT.
Press 2 key and then ENT.
BASE PMT
1 2
BASE PMT
1 3
Operation
105
1
1