Note - PerkinElmer 200A Series User Manual

Note

Be sure to read through and understand the following points with regard to this User's Guide.
1. Information contained in this document is subject to change without notice for improvement.
2. No part of this manual may be reproduced, transmitted or disclosed to a third party in any form
or by any means without the express written permission of PerkinElmer, Inc.
3. PerkinElmer, Inc. assumes no liability for any direct, indirect, or consequential damages arising
from use not described in this manual.
4. Utmost care must be exercised when using the instrument.
5. This document does not provide any warranty or permission for industrial properties or any
rights to grant license lawfully and without infringement.
This instrument is intended for use by persons having a basic knowledge of chemical analysis
procedures. Keep in mind that improper use of analytical instruments, chemicals or samples would
result not only in wrong analytical data but also in consequences adverse to safety.
Please read this instruction manual carefully before attempting operation and acquaint yourself with
the Series 200a FL detector for its correct use.
The liquid chromatograph system comprises a pump unit for delivering eluents, a sample
introduction unit for injecting samples (autosampler, manual injector), a column unit for separating
components of each sample, a column oven unit for maintaining the column at a constant
temperature, and a detector unit for detecting separated sample components as electric signals.
Before using the liquid chromatograph system, read carefully the instruction manual accompanying
each of these units so that you can carry out analysis properly.