Table of Contents
Advertisement
Series 200a Fi User's Guide
62.
UI Pad
This section describes how to use the UI pad for operations.
The UI pad is provided with common control keys available for different modules and unique control keys
for particular modules. The functions of the common control keys are described below.
1. Using the UI Pad
a. Functions of Common Control Keys
A/Z
WL
SET UP
Fig. 4-4 UI Pad
Key Designation
UTLTY (utility)
GLP
PROG (program)
ESC (escape)
DEL (delete)
INSERT
GLP
PROG
UTLTY
Function
Starts instrument parameter setting.
Starts GLP function setting. Usable for displaying a logbook of component
parts of each module, for triggering a reset, and for locking the UI pad keys.
Starts program editing.
Returns control to the monitor window.
Deletes a cursor-pointed step.
This key is effective only in program editing.
When the cursor is positioned on the TIME input part, pressing the DEL key
removes a step pointed by the cursor. When the cursor is positioned on
another input part, pressing the DEL key removes an item pointed by the
cursor.
Pressing the ESC key on a window where "-" is indicated returns control to the
monitor window, causing cancellation of a DEL key action.
•
Pump/detector time program
When the DEL key is pressed, "-" is indicated.
This deletion can then be defined by pressing the ENT key.
•
Autosampler sequential program
When the DEL key is pressed, the relevant step number is deleted and
"-" is indicated. This deletion can then be defined by pressing the
ENT key.
START STOP
7
RECORD
SPECT
4
MARKER
1
Table 4-1
LOCK OFF
8
9
0
ESC
5
6
･
DEL
2
3
CL
ENT
Advertisement
Table of Contents
Troubleshooting
