Local Node Configuration Menu - Cabletron Systems Netlink FRX8000 Installation And Setup Manual

Nod e Configuration
MAIN MEN U
A Port Con figu ration
R R etu rn
Select:
Figure 2-7 Local Node Configuration Menu
Press
[A]
appropriate number and pressing
Node ID:
LP ID (the LP containing the trunk port):
Port:
Underlying Physical Port (only if the port number is
Physical Port Type (if asked):
Physical Interface (if asked):
449),
3. The displayed menu depends on whether the port is a physical trunk
(Figure 2-8) or logical trunk
When this node is connected to the operational network, the values specified
in the local node configuration must match the database values. The param-
eters to be configured are described under "Configuring Trunk Ports" in the
Netlink FRX8000 User Guide.
4. To change a value in a Port Configuration record, press the letter that precedes
the parameter. Values of
opposite. Other values must be entered.
2-10
and, when prompted, enter the requested information by typing the
.
1-250
. ( are physical ports;
0–63 0–7
(RS-530), or (X.21).
7 8
(Figure
or
Y N
.
[Enter]
.
0–7
are logical ports.)
8–63
(X.25) or (Frame Relay).
X F
(RS-232), (V.25bis),
3 4
2-9).
(yes or no) will automatically change to the
FRX8000 Installation & Setup Guide
): .
8–63 0-7
(V.35), (RS-
5 6