The Reset Switch - Cabletron Systems 9A426-01 User Manual

Preparing and Installing the 9A426-01 Module

The Reset Switch

The Reset switch is located under the top plastic tab, as shown in Figure 2-12. Use
the reset switch to reset the module's processor, shutdown (power down) the
module, and/or restart the module.
• To reset the module's i960 processor, press the reset switch twice within three
seconds.
• To shutdown the module, press and hold the reset switch for three or more
seconds.
• To restart the module, press the reset switch momentarily.
To enhance module security, use SNMP management to disable the reset switch.
2-18
SMB CPU
Figure 2-12. The Reset Switch
Reset Switch