Using The Reset Button - Cabletron Systems 6E122-26 User Manual

4.4

USING THE RESET BUTTON

The RESET button located near the upper plastic locking tab of the
module (refer to
processor without affecting the NVRAM.
Pressing the RESET button resets the device, and all current
!
switching being performed by the device is halted. A module
CAUTION
downtime of up to two minutes will result from this action.
Reset Button
To reset the 6E12X-26 and 6E13X-25 processor, press and release the
RESET button. The module processor goes through a reset process of
approximately 20 seconds. Additional module downtime may be added as
the module reenters the network.
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
Figure 4-3) resets the 6E12X-26 and 6E13X-25
Figure 4-3 RESET Button
Using the RESET Button
Ethernet
6E132-25
4-7