Table of Contents
Advertisement
The Reset Switch
The Reset switch is located on the front panel, under the top plastic tab as shown
in Figure 2-2. It serves two functions:
•
•
SNMP management may be used to disable this switch to enhance module
security.
Pressing the Reset switch twice within three seconds causes the processor
(i960) to reset.
Pressing and holding the switch on for three or more seconds causes the
module to shutdown. Pressing and holding again for three seconds restarts the
module.
SMB
CPU
Figure 2-2. The Reset Switch
The Reset Switch
Reset Switch
2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the MMAC-Plus 9A128-01 and is the answer not in the manual?
Questions and answers