Port Configuration Command Set; Reviewing Port Status - Enterasys Matrix E1 1G694-13 Configuration Manual

Port Configuration

Reviewing Port Status

4.2

PORT CONFIGURATION COMMAND SET

4.2.1 Reviewing Port Status
Purpose
To display port operating status, duplex mode, speed and port type, and statistical information
about traffic received and transmitted through one port or all ports on the device.
Commands
The commands needed to review port status are listed below and described in the associated
sections as shown.
•
show port status
•
show port counters
4-6 Matrix E1 Series (1G694-13) Configuration Guide
(Section 4.2.1.1)
(Section 4.2.1.2)