About Ip Multicast Filtering - Enterasys Matrix E1 1G694-13 Configuration Manual

E1 series
Hide thumbs Also See for Matrix E1 1G694-13:
Table of Contents

Advertisement

IGMP Configuration
Reviewing IGMP Groups
8.3

ABOUT IP MULTICAST FILTERING

The Internet Group Management Protocol (IGMP) runs between hosts and their immediately
neighboring multicast switch device. The protocol's mechanisms allow a host to inform its local
switch device that it wants to receive transmissions addressed to a specific multicast group.
A multicast-enabled switch device, can periodically ask their hosts if they want to receive
multicast traffic. If there is more than one switch device on the LAN performing IP multicasting,
one of these devices is elected "querier" and assumes the responsibility of querying the LAN for
group members.
Based on the group membership information learned from IGMP, a switch device can determine
which (if any) multicast traffic needs to be forwarded to each of its ports. At Layer-3, multicast
switch devices use this information, along with a multicast routing protocol, to support IP
multicasting across the Internet.
IGMP provides the final step in an IP multicast packet delivery service since it is only concerned
with forwarding multicast traffic from the local switch device to group members on a directly
attached subnetwork or LAN segment.
This switch supports IP multicast filtering by
passively snooping on the IGMP query and IGMP report packets transferred between IP
multicast switches and IP multicast host groups to learn IP multicast group members, and
actively sending IGMP query messages to solicit IP multicast group members.
The purpose of IP multicast filtering is to optimize a switched network's performance, so multicast
packets will only be forwarded to those ports containing multicast group hosts or multicast switch
devices instead of flooding to all ports in the subnet (VLAN).
The switch with its IP multicast filtering capability, not only passively monitors IGMP query and
report messages; it can also actively send IGMP query messages to learn locations of multicast
routers/switches and member hosts in multicast groups within each VLAN.
However, note that IGMP neither alters nor routes any IP multicast packets. Since IGMP is not
concerned with the delivery of IP multicast packets across subnetworks, an external IP multicast
switch is needed if IP multicast packets have to be routed across different subnetworks.
8-12
Matrix E1 Series (1G694-13) Configuration Guide

Advertisement

Table of Contents
loading

Table of Contents