Welcome to the Enterasys Networks Matrix E1 1G694-13 Configuration Guide. This manual
explains how to access the device's Command Line Interface (CLI) and how to use it to configure
the Matrix E1 1G694-13 switch device.
Depending on the firmware version used in the Matrix E1 device, some features described in this
document may not be supported. Refer to the Release Notes shipped with the Matrix E1 device to
determine which features are supported.
USING THIS GUIDE
A general working knowledge of basic network operations and an understanding of CLI
management applications is helpful before configuring the Matrix E1 device.
This manual describes how to do the following:
•
Access the Matrix E1 CLI
•
Use CLI commands to perform network management and device configuration operations
•
Establish and manage Virtual Local Area Networks (VLANs)
Important Notice
Matrix E1 Series (1G694-13) Configuration Guide
About This Guide
xv