Spanning Tree Configuration
Reviewing and Setting Spanning Tree Port Parameters
5.2.2.9
show spantree adminpoint
Use this command to display the administrative point-to-point status of the LAN segment attached
to a port.
show spantree adminpoint port_string
Syntax Description
port_string
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the point-to-point status of the LAN segment attached to front
panel port 3:
Matrix>show spantree adminpoint ge.0.3
admin point-to-point = AUTO for port ge.0.3
5-34
Matrix E1 Series (1G694-13) Configuration Guide
Specifies the port(s) for which to display point-to-point
status. For a detailed description of possible port_string
values, refer to
Section
4.1.2.