8.2.2.4
set igmp report delay
Use this command to set the number of queries that must be missed before an IGMP report delay
timer is started.
set igmp report delay size
Syntax Description
size
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the IGMP report delay to 4 queries:
Matrix>set igmp report delay 4
IGMP report delay set to 4.
Setting IGMP Query Count and Report Delay
Specifies the number of IGMP queries to be missed.
Matrix E1 Series (1G694-13) Configuration Guide
IGMP Configuration
8-9